Hello, I'm trying to boot 'UBCD v.5.3.7' from Win 7 machine which O/S is broken and not working ![:cry:]( "Crying or Very sad")
- Win 7 machine: Sony Vaio (SVE14A1AJ) => dead machine, black screen after logo screen with Win 7 bootable DVD
- Win 10 machine: Lenovo B41 => this active machine, PLDS DVD/CD-ROM drives
1. Downloaded 'UBCD v.5.3.7' using this Win 10 machine.
2. Checked checksums (MD5 & SHA1) with 'Arpoon Checksum' and all matched.
3. Burned the iso file into DVD-R (as I don't have any CDs) with 'Active@ ISO Burner' at x1 speed.
4. Set optical drive as the first boot device in BIOS for the Win 7 machine.
5. the Win 7 machine reads the DVD during boot for a while, but no menu shown.
6. then Window's boot option screen shown.
Yes, I read FAQ page and re-burn DVD a couple of times but the results are the same.
Any suggestions on fixing this issue? Any idea would be greatly appreciated.
Thank you in advance![:D]( "Very Happy")
- Win 7 machine: Sony Vaio (SVE14A1AJ) => dead machine, black screen after logo screen with Win 7 bootable DVD
- Win 10 machine: Lenovo B41 => this active machine, PLDS DVD/CD-ROM drives
1. Downloaded 'UBCD v.5.3.7' using this Win 10 machine.
2. Checked checksums (MD5 & SHA1) with 'Arpoon Checksum' and all matched.
3. Burned the iso file into DVD-R (as I don't have any CDs) with 'Active@ ISO Burner' at x1 speed.
4. Set optical drive as the first boot device in BIOS for the Win 7 machine.
5. the Win 7 machine reads the DVD during boot for a while, but no menu shown.
6. then Window's boot option screen shown.
Yes, I read FAQ page and re-burn DVD a couple of times but the results are the same.
Any suggestions on fixing this issue? Any idea would be greatly appreciated.
Thank you in advance
